How to Remove Glass Stickers?(Part 2)

Method 3. Washing alkali

① Inject hot water into the pool or bucket, and pour the washing alkali. The amount of washing alkali depends on how much water you use, it should be between 120 ml and 240 ml. The solution consisting of washing alkali and hot water can dissolve the glue on the 3d multi-layer sticker, destroying the tight bond between it and the glass surface.

Washing alkali can cause skin irritation, so don't forget to wear gloves when contacting. Compared with the foam generated by mixing baking soda powder and dishwashing liquid, the foam generated when washing alkali and hard water are combined has greater friction, so it can more effectively clean stains on the surface of objects and clothing. Hard water refers to water containing a large amount of minerals.

② Soak the object in the solution for 30 minutes. The length of the soak time depends on the strength of the sticker adhesive; you can even soak it all night if necessary.

③ Remove the item from the solution. Since the washing alkalinity is much stronger than the soda powder, you should be able to easily wipe or peel off the sticker.

Always rinse items that have been soaked with washing alkali, especially glass jars or glasses used for food.

Method 4. Heating

① Heat the glass surface. Set the hair dryer to maximum power, and then heat the sticker for 1 to 2 minutes. You can also place objects directly in the sun for a few hours. The hot air will melt the glue on the sticker, but if you don't remove the sticker immediately, the glue will cool and harden again.

If you want to remove the oem removable car window sticker from the window, just park the car in the sun for 2 to 3 hours.

Heat the glass or plastic product with boiling water for about 15 seconds. If you want to remove a label from a flat surface such as a lid, you can try to tear the label off while you pour water on the back of the lid.

② Peel off the sticker. Use your fingers to gently remove the label. Objects are very hot, so be careful not to burn your fingers. You can also pry a corner of the sticker with a blunt knife, and then slowly remove the sticker. Be sure to choose a knife that is not sharp to the touch to avoid scratching the glass surface.

If you want to remove the OEM removable car window sticker from the window, just park the car in the sun for 2 to 3 hours.

Heat the glass with boiling water or ③ use soap, oil or any type of glue remover. There may still be some stubborn glue marks on the surface of the item. You need to take more measures to remove it.

Method 5.  Disinfection alcohol

① Dip alcohol with a paper towel, cotton ball, cotton swab or cloth. This method is especially suitable for glass objects that cannot be soaked in a bucket, and it is more convenient to clean up afterwards.

Since disinfectant alcohol burns easily, use it with extreme caution. Do not use alcohol on stoves or in hot areas. When using, make sure the surrounding is well ventilated. The plastic product is about 15 seconds. If you want to remove a label from a flat surface such as a lid, you can try to tear the label off while you pour water on the back of the lid.

③ Peel off the sticker. Use your fingers to gently remove the label. Objects are very hot, so be careful not to burn your fingers. You can also pry a corner of the sticker with a blunt knife, and then slowly remove the sticker. Be sure to choose a knife that is not sharp to the touch to avoid scratching the glass surface.

③ Use soap, oil or any type of degumming agent. There may still be some stubborn glue marks on the surface of the item. You need to take more measures to remove it.

Christmas Static Cling Window Sticker

Method 5. Disinfection alcohol

① Dip alcohol with a paper towel, cotton ball, cotton swab or cloth. This method is especially suitable for glass objects that cannot be soaked in a bucket, and it is more convenient to clean up afterwards.

Since disinfectant alcohol burns easily, use it with extreme caution. Do not use alcohol on stoves or in hot areas. When using, make sure the surrounding is well ventilated.

② Use alcohol-tissue paper towels and other things to rub the stickers. If the christmas static cling window sticker still doesn't tear off, you may need to repeat the previous steps.

Sanitizing alcohol is a solvent and a cleaning agent. It can dissolve other substances, such as glue on stickers. Because electronic products fail when they encounter water, and alcohol has the characteristics of rapid evaporation, people often use alcohol to clean electronic products.

Try pressing the wet paper towel against the sticker to allow the sticker to absorb the alcohol.

Method 6. WD-40 Multifunctional Lubricant

① Take protective measures to prevent WD-40 from damaging the human body or the surface of certain materials. WD-40 is a powerful solvent that can dissolve glue and a very strong chemical reagent. Do not allow it to come in contact with skin, fabric, or even glass.

② Spray a layer of WD-40 evenly on the surface of the sticker. In order not to spray on the glass, you can spray some WD-40 on a clean cloth, and then wipe it on the sticker.

Wear gloves to protect your hands.

④ Remove the stickers with a clean cloth. At this point, the sticker should be easy to wipe off. If the sticker is particularly stubborn, you may need to scrape it off with a small spatula or a blunt knife.

hint:

There are many products on the market dedicated to removing stickers. When purchasing and using, be sure to read the labels and instructions carefully.

Use a cotton ball to moisturize the nail polish containing glycerin and rub the sticker. This will also remove glue marks.

note:

Solvents often deform plastics, fabrics, and other sensitive materials, so use them with care.

When heating the glass surface with a hair dryer or a hot air gun, be careful not to crack the glass.

In order to avoid scratching the surface of the object, it is best to choose a stainless steel blade.

Regardless of the solvent used, wash your hands thoroughly afterwards.

Beware of scratching the glass. When scraping off stickers with a blade, a knife, or a plastic card, do not use too much force.